Best Practice For Fiber Cabling
Join 1000's of Authors at StreetArticles Today!

Best Practice for Fiber Cabling

Patch cables have the potential to be the weakest link in copper and fiber optic network infrastructures. It is essential to follow correct procedures in administration of copper and fiber patch cables to achieve optimum performance and reliability. Applying best practice at every stage will also minimize costs related to moves, adds and changes.

The principles of good cable management for fiber patch cables are similar to those for copper network patch cables. However, there are special considerations with fiber cabling, and extra care is needed in some areas. Best practice in managing fiber patch cables can be divided into four parts: planning, preparation, patching, validation.

Planning

Administration activities are initiated with a change request. The change request must contain all necessary information to begin the planning process.

1. Searching the Records

Once a request form is received, search the records to be sure of the circuit path. The floor plans provided by the system designer should show backbone/riser cables, TRs/FDs and lOs. Any changes or additions made since your cabling infrastructure was installed should also have been documented. If the records are stored in a database, a different screen can be displayed for each user. This screen should supply you with the information you need, including the riser and horizontal fiber pairs serving the particular WAO and the locations of available fiber.

2. Check Design Guidelines and Match Cords

Make sure you know the specifications and design of your fiber cabling. Ensure you have patch cables matched to the installed cabling, since optical fiber patch cables of different types (LC, SC, ST etc.) should not be mixed.

3. Efficient Routing

The first step in choosing a cord of the correct length is to determine the best route between its points of connection. This is usually the shortest route through horizontal and vertical cable pathways that does not obstruct or interfere with other cords and connectors on the panel. Avoid running cords through cable pathways that are already congested.

4. Vertical and Horizontal Sizing

Having established the best route for the cord, find the required length by adding the horizontal and vertical distances.

5. Minimizing Slack

When selecting a cord to make a cross connection, avoid excessive slack and provide a neat appearance. Tight cords will pull on connectors and too much slack complicates cord management, making the panel more difficult to work on.

6. Efficient Management

Ensure you have cords of the right length available and that panels are fitted with correct cable management accessories. In general, a horizontal patch cable management guide is needed for every two rack units, depending on the type of optical patch panel or Lightguide Interconnect Unit (LIU). At the optical patch panel or LIU, route patch cables equally toward both sides of the vertical cable management channels to prevent overloading one side.

7. Maintaining Old with New

Take care not to mix up cords of different core diameters. Additionally, cords must be of the same or higher bandwidth as the behind-the-wall cabling. System performance regarding distances cannot be guaranteed if lower rated patch cables are used. Color-coding of connectors for different fiber standards make it easy to avoid confusion.

8. Core Diameter

Fiber patch cables must use the same core diameter as the trunk cable. A large attenuation penalty will occur when using a 62.5μm patch cable with a 50μm trunk cable fiber or vice versa. Single mode fiber patch cables should use fiber with the same Mode Field Diameter as the trunk cable fiber.

9. Factory-terminated vs. Field-polished

Factory-terminated cords guarantee fiber patches with optimum performance. Field polished cords are not covered by warranties and are likely to deliver lower performance and variable quality.

10. Fiber Safety Precautions and Responsibilities

The lasers that carry information through fiber cables may cause irreparable damage to the retina. Always avoid looking directly into an energized optical fiber, and never attach a microscope or other magnifying device to an energized optical fiber. Always wear appropriate eye protection and ensure that unused ports are covered.

Preparation

To minimize disconnect time, do as much preparation as possible before performing administration activities.

1. Study Administrative Records

Locate the ports that must be connected or reconnected. Ensure technicians have clear information on what they need to do, including labeling information for the ports involved.

2. Cord Inspection

It is essential to ensure cords are of the right type and quality, and that they are clean and in good condition. Fiber patch cables should be inspected for physical damage including:

Stress marks from bending on the sheath

Pullout of fibers from the connector

Cracks or scratches on fiber end in connector using a fiber examination microscope

Cleanliness is vital in fiber optic connections so special care is needed with:

Connector ends on patch cables

Connector ends on panels

Connector ends on network equipment

(For detailed information on how to clean ST, SC, LC and MPO connectors, please view the fiber optic cleaning tutorials in Fiberstore.)

Materials that will be needed include:

Cassettes for connector ends

Lint-free wipes

Cleaning stick for behind the wall (BTW) MPOs

Patching

Once work on a panel is started, it should be completed without delay using best practice at each stage.

1. Cord Handling

Cord Handling: Kinks, snags, pinches and poor contacts can dramatically reduce the performance of a fiber patch cable. The following factors are important in avoiding these problems.

2. Bend Radius

The minimum bend radius for optical fiber patch cables varies with cord diameter. For 1.6 mm and 3.0 mm cords the minimum un-loaded bend radius is 3.5 cm, and for MPO fiber cable, the minimum bend radius is ten times the cord diameter. Exceeding the bend radius can result in significant additional loss and adverse impact on channel performance.

3. Cord Pulling and Stress

Be careful not to use excessive force during the patching process. This can stress cords and connectors, reducing their performance. If you need to use force in pulling a cord, something is wrong. Find the problem and fix it before proceeding.

4. Bundling

Bundling and tying cords gives the panel a neat appearance but tight bundling increases the risk of pinching. Do not tighten ties beyond the point where individual cords can rotate freely. Use only products manufactured for this purpose, and consider the use of products that can be re-used without the use of tools such as "hook and loop" strapping.

5. Routing Cords Through Cable Pathways

If the existing cord is the right length, it may be possible to re-use it. If this is the case, remove the cord completely and re-run it in through the cable pathways. This is the only sure way to ensure there are no tangles, kinks or strains in the cord.

6. Steps in Removing and Adding Cords

Removing a patch cable

Locate the existing circuit on both fields of the TR/FD or equipment room (ER)

Unplug the patch cable at one end and cover the connector endface(s) with a dust cap

Cover the open port with a dust cover – some adapter ports have spring-loaded covers that automatically cover the port

Gently lift the cord straight up, taking up slack until its movement is detected

Follow the cord routing, gently removing it along its length from the cable pathways

Find the other end and unplug it

Fully remove the cord

Adding a patch cable

Identify the location of the new circuit

Plug one end of the patch cable into the fiber coupling

Route the patch cable

At the field nearest to the switch and/or computer port field, locate the new connecting point

Plug the other end of the patch cable into the fiber coupling

Validation

1. Final Visual Inspection and Panel Closure

Patching must be right first time since mistakes can cause costly disruption and re-work. The time taken to make a final visual check on connections is a good investment. When patch panels are mounted in enclosures, ensure these are securely closed and, where necessary, locked, making sure that cord slack is not snagged or pinched by the doors.

2. Update Documentation


Street Talk

No comments present
You May Also Like
Cigarettes - Fires In the Data Center!
The first and most destructive fire occurred in the Ukraine in 2010 where burned largest data center. In the evening of March 27 in Odessa in the data center of the biggest hosting provider Hosting started a fire. The Hosting is one of the largest and best-known web hosting providers.…
By: Kinna in  Communications  >  Broadband Internet   Feb 29, 2016  
0
  Likes: 0

Starwhen A Star Like Our Sun Runs Out Of Fuel And Begins to Die, Violent Stellar Winds Rip it to Shreds, Blasting Massive Quantities Of Stellar Matter
When a star like our sun runs out of fuel and begins to die, violent stellar winds rip it to shreds, blasting massive quantities of stellar matter into space. The result is a planetary nebula, a vast bubble of expanding gas that represents a star's final, beautiful, farewell. As imaged…
By: hodress in  Communications  >  Broadband Internet   Aug 10, 2015  
0
  Likes: 0

Netflix With Its Best Overseas Services
Netflix is essentially an online streaming content providing service that is employed to feature content to completely different web site for the betterment of the website. Netflix is accustomed read completely different tv programs and films by connecting an online access employing a TV card to the PC system and…
By: mikealfred15 in  Communications  >  Broadband Internet   Apr 01, 2014  
0
  Likes: 0

How to Find the Best Broadband Plans In Your Country?
Broadband is very common thing now-a-days, and it has its presence in almost every part of the World. But even after using it for so many years now, there is a question, which is constant i.e. “How to find the best broadband plan in your respective country. As the broadband…
By: John Slater in  Communications  >  Broadband Internet   Jan 11, 2014  
0
  Likes: 0

Optical Qsfp Cable Accelerates Your Internet Usage
Are you tired of that lagging internet speed? Do you wish you had a faster connection so that you could enjoy watching videos or communicate with your friends seemingly faster? In-case your answer is yes, the solution to all these problems is a better QSFP (Quad Small Form Factor Pluggable)…
By: Mr. Arun Kohli in  Communications  >  Broadband Internet   Jan 07, 2014  
0
  Likes: 0

Passive Optical Network - pon
Passive optical network-PON is a network that brings optical fiber singal to the end of users by the point-to-multipoint(P2MP) fiber to the premises in which optical splitters are used to “broadcast” signals to many users. A PON consists of an optical line terminal (OLT) at the service provider’s central office…
By: xiqing zhang in  Communications  >  Broadband Internet   Dec 12, 2014  
0
  Likes: 1

Broadband Internet
ccess the internet on your phone or computer with t-mobile s network learn more today. 3g mobile internet broadband cards modems verizon wireless aircards broadband services : blazing fast internet speeds from 1 meg to 100 meg website hosting : let us host your website basic, enhanced, and premium services.…
By: angela1 in  Communications  >  Broadband Internet   Jun 27, 2011  
0
  Likes: 0

8 Ways to Use Twitter for Your Branding
Are you intimidated by Twitter as part of a Marketing campaign? Do you find it difficult to get your point over in the famous 140 character limits without resorting to an unprofessional ‘teen-slang’? There may be some points about this online social community that you are missing. It is definitely…
By: Steve35 in  Communications  >  Broadband Internet   Nov 18, 2014  
0
  Likes: 0

How Netflix Works With Its Amazing Services
If you are new to NetFlix you will be excited to know that NetFlix is free for a month. NetFlix provides trial for a month to the new users. In this trial you are free to watch as much movies and dramas of your choice as you want. You can…
By: mikealfred15 in  Communications  >  Broadband Internet   Sep 07, 2014  
0
  Likes: 0

What is Cloud Sourcing?
Cloud sourcing is similar to outsourcing, wherein a company employs a cloud service provider to perform some supposedly “in-house” tasks, and has the flexibility to be paid per usage, unlike outsourcing providers that are paid either in monthly, quarterly, or yearly terms. This allows companies to align their outsourcing needs…
By: Kevin Gee in  Communications  >  Broadband Internet   Sep 17, 2015  
0
  Likes: 2

Facebook is Addictive
Do you use Facebook? Millions of people do. Facebook is a social network like Twitter, Myspace, Orkut, LinkedIn, and the many other social networks that exist. On any given day, there are bound to be millions of users on this site. Why? What are they doing? One thing they might…
By: Hollie E. Townsend in  Communications  >  Broadband Internet   Feb 06, 2012  
0
  Likes: 0

Who Will Be the Next Huawei CEO After Ren Zhengfei
Ren zhengfei: how would huawei be failed, and how would huawei be broke down? Now, you are lonely at the top; how will we go next step when wireless technology is in a situation like this? And what is our technical thinking in the future? What is the technical route?…
By: yuri4 in  Communications  >  Broadband Internet   Jul 03, 2014  
0
  Likes: 0

The More And More Mature Fiber Optic Cables Transmission Technology
Fiber optic media are any network transmission media that generally use glass, or plastic fiber in some special cases, to transmit network data in the form of light pulses. Within the last decade, optical fiber has become an increasingly popular type of network transmission media as the need for higher…
By:  in  Communications  >  Broadband Internet   Jan 06, 2015  
0
  Likes: 0

Introduction to Vsat
As the world is turning into an online global village, the need for internet connectivity is higher than ever. Telecommunications companies are competing neck to neck to provide consumers with an internet connection anywhere in the country. There are, however, many areas where an ISP does not have the conventional…
By: Ahmed Hussain in  Communications  >  Broadband Internet   May 28, 2015  
0
  Likes: 0

Will Home Phone Be Able to Sustain Its Importance In Today’s Mobile Generation?
It can be a question or it can be point for the debates that, in today’s mobile generation, can the old Home phone technique sustain its importance. As in present scenario, every country is focusing on the development in each and every aspect, whether its technical or non-technical. Hence in…
By: John Slater in  Communications  >  Broadband Internet   Jan 09, 2014  
0
  Likes: 0

Article Views: 1065    Report this Article