Energy Management Needs In The Construction Industry Of UAE
Join 1000's of Authors at StreetArticles Today!

Energy Management Needs In the Construction Industry Of UAE

The construction industry of UAE is for sure on its boom since the past decade, and the hosting opportunity of Expo 2020 by Dubai has taken this boom to new heights. Millions of hosts from all around the globe will be simply waiting to get mesmerized by the new construction standards of Dubai. However, this boom has also raised the energy management requirement for Dubai’s construction industry. Energy management practices are changing as the climatic conditions and more importantly Dubai’s construction trends are changing. Here are the 3 basic energy management needs that Dubai’s Construction Industry must be looking for before Expo 2020:

Cost Reduction

The main essence of going with energy management solutions is cost reduction. Energy management practices simply make a project more feasible and more efficient, resulting in less expenditure on maintenance. It is a fact that energy management solutions cost significantly but this cost is much less than the one required for building maintenance. Cost reduction is done by a variety of energy management practices such as installation of cooling systems, BTU installations, BTU metering and robust billing systems. In Dubai’s construction industry, energy management practices are a must as compliance and standards cannot be compromised.

Controlling Carbon Emission

Carbon Emission is a sever issue that is haunting the whole mankind. Its impact on climatic conditions and consequently on the weather around the globe has caused quite a few debates internationally. All this has put a pressure on global construction industry to ensure lesser carbon emission. To achieve this, the only solution is to get effective energy management solutions from experienced people. Carbon taxes and other extra costs that result in inefficient energy management of the building can lead to extra loss to project owners and investors. Therefore ensuring effective and active energy management system is a must for construction industry in this era.

Risk Control

Risk control is another basic factor that raises the need of energy management system in the construction industry. The greater the amount of energy consumed by a project, the more cost will be required to control that consumption. This causes an extra risk to the project completion and its operation and thus energy management system here becomes a basic need. An energy management system not only does the billing of the project operations abut also provide solutions to this energy consumption issue. Energy management system simply reduces the demand of energy and this way both the project risk and costs reduce. This is why the construction industry is running after energy management systems and those who provide professional energy management services.


Street Talk

No comments present
You May Also Like
4 Ways to Manage A Demolition And Refurbishment Project
Whether you’re knocking down your house to rebuild from scratch or taking on a larger-scale commercial project, it’s a good idea to look for tips and advice before you begin – especially if you’re a newbie to the world of construction. Doing the research beforehand can be the difference between…
By: Rory Oza in  Business  >  Construction Industry   May 31, 2016  
0
  Likes: 0

UAV Drones Helps In Inspection Service
UAV drones are blessing in this modern world to inspect the areas and keep them clean according to the standard requirements. This equipment is very beneficial and operate sin complex industrial environments which frequently have unseen hazards. With the help these equipment it becomes easy to deliver new insights into…
By: john walter in  Business  >  Construction Industry   May 31, 2016  
0
  Likes: 0

New Build Homes Huddersfield
The needs of a family are different from one to the other and each of them requires a solution to meet their demands. If you want to be sure you will turn to the right option, you have to learn more about them. Each option has its own pros and…
By: aby in  Business  >  Construction Industry   May 30, 2016  
0
  Likes: 0

How Do Concrete Pumps Work
Anybody working in the development business, managing all children of developments and solid structures, realizes that solid pumps are crucial for certain employments. Cement is a durable, solid and moderate development material; in this manner it is widely utilized. A structure may utilize either solid pieces or poured concrete. Solid…
By: Zeeshan Ahmad in  Business  >  Construction Industry   May 24, 2016  
0
  Likes: 0

Phenomenal Growth Rate for Pre - engineered Steel & Metal Buildings In Future
The increasing popularity of PEB systems in the industrial sector and the development of infrastructure have propelled the Indian pre-engineered steel buildings market to experience robust growth. Sectors including power, logistics, automotive, pharma, FMCG and capital goods offer huge growth opportunity for PEB in India. In 2011, the structural steel…
By: Sunil Srivastava in  Business  >  Construction Industry   May 23, 2016  
0
  Likes: 0

Mobile Cranes Are More Helpful In A Construction Project
Everyone knows that crane plays an effective role in construction project. There are many types of crane that operates on the construction site but among them mobile crane is most beneficial and helpful. Companies prefer these cranes because of their strong, mobility and versatile factor. There are effective to handle…
By: OliviaGrace in  Business  >  Construction Industry   May 19, 2016  
0
  Likes: 0

High - frequency Electric Resistance Welded Steel Weld Longitudinal Wave Defect Detection
Because testing standards, testing equipment, testing methods and the ultrasonic probe, limit reference block of the high frequency electric resistance welded steel pipe manufacturing, there are still a large number of longitudinal defects undetected problems during installation. In this paper, ultrasonic testing methods, testing equipment, ultrasonic probe, test block, etc.…
By: suli in  Business  >  Construction Industry   May 18, 2016  
0
  Likes: 0

Co2 Weld Pipe Forming Side
CO2 gas welding and assembly of bevel form of more stringent requirements. Butt weld groove forms and dimensions include angles, blunt edges and assembly space. Bevel angle mainly affect whether the arc can penetrate to the root of the weld, so that the root penetration, and then get a good…
By: suli in  Business  >  Construction Industry   May 16, 2016  
0
  Likes: 0

Lsaw Pipe Production Line Pre - bending Process
Pre-bending is a major step LSAW steel pipe production line, and its purpose is to complete both sides of the plate pre-bending, bending radius on both sides of the steel sheet at or near the radius of the tube production specifications, thus ensuring the pipe weld area geometry and dimensional…
By: suli in  Business  >  Construction Industry   May 10, 2016  
0
  Likes: 0

Weld Reinforcement Control Of Ssaw Steel Pipe
Evaluation of ssaw steel pipe welding quality, first look inside and outside weld reinforcement and shape control how well the weld line is structured flow. Weld reinforcement tall and not too smooth transition, the weld toe stress concentration coefficient large against SCC unfavorable. In addition, the external weld reinforcement tall,…
By: suli in  Business  >  Construction Industry   May 09, 2016  
0
  Likes: 0

Top Quality Building Services Oldham Offering New Builds Oldham And Much More
The Oldham city has a long and interesting history of developing from an industrial centre to a service-oriented economy. The demand for new builds Oldham has everything to do with the fact that this part of the country has a lot of scope for development. There are jobs, thanks to…
By: jfab7 in  Business  >  Construction Industry   May 05, 2016  
0
  Likes: 0

Common Defects And Prevention Of Spiral Welded Seam
Pre-finish welding technology is a thick-walled large-diameter spiral welded pipe production of oil and gas pipelines in the more advanced technology. The first step in the use of pre-finish welding production of spiral welded steel strip after the molding machine in continuous gas shielded arc welding welding. Tube after welding…
By: suli in  Business  >  Construction Industry   May 05, 2016  
0
  Likes: 0

Basic Principles Of Spiral Submerged Arc Welded Pipe Forming
Spiral welded seam is to produce a large-diameter steel pipe is very cost-effective method. In recent years, the annual output of welded steel pipes 65% of annual production. The annual production of spiral seam welded steel pipe accounts for about 5-10% of annual production, plays an important role in the…
By: suli in  Business  >  Construction Industry   May 03, 2016  
0
  Likes: 0

Height Safety Access Systems And Rope Access Services In Perth
AWMA is additionally a metropolis based mostly all company dedicated to supply height safety access systems installations, facade improvement services, facade construction and facade maintenance services to knowledgeable commonplace whereas remaining competitively priced thus to influence this business market. The company is devoted to providing quality services that systematically exceed…
By: B Stevens in  Business  >  Construction Industry   May 01, 2016  
0
  Likes: 0

Analysis And Adjustment Of ERW Units
Fault welding machine is relatively more, and the cause of the failure is also more complex, the result is often caused by a variety of reasons, can be caused by several reasons or a result. Tube welding machine appeared scratches caused mainly by two parts, one guide means, and second…
By: suli in  Business  >  Construction Industry   Apr 29, 2016  
0
  Likes: 0

Article Views: 922    Report this Article