How To Be Safe Around A Band Saw
Join 1000's of Authors at StreetArticles Today!

Those shiny Wilton saw blades sitting along with a golden Powermatic saw and JET band saw look pretty attractive to a woodworker. But these amazing tools that help you produce masterpieces pose a lot of danger if not maneuvered with appropriately. If you are a guy with a band saw, then manufacturers expect you to follow the rules below to the tee:

Read the Manufacturer’s Guide

Don’t be a smartass, even if you have tons of experience there could be something different about a new machine. Always read the owner's manual carefully before attempting to use the machine. Know the limitations and hazards associated with its use. It also helps with understanding the machines, its ins and outs in a better way.

Don’t be Reckless

Take every precaution to protect yourself, others around you, and the machine itself from improper use. Safety is a combination of common sense, knowing how to use the machine and being alert at all times when using the machine. Horseplay (reckless behavior) should never be tolerated around any power machinery. Never allow a child near such a dangerous machine.

Dos and Don’ts of Dressing

Do not wear loose clothing, neckties, jewelry, or gloves that can get caught in moving parts. Confine long hair. Keep sleeves above the elbow. If necessary put on the eye and ear protection, rubber boots and a hard hat.

Ground Your Machine

Your machine must be electrically grounded. If a cord and plug are used, make certain the grounding lug connects to a suitable ground. Follow the grounding procedure indicated by the National Electric Code. Keep power tools in dry areas free from moisture. This will also keep the rust away making the machine even more durable and increasing its life time.

Guards

Be sure machine guards are in place and in good working order. Use them at all times on operation where they can be used. If a guard must be removed for any operation, make sure it is replaced immediately following completion of that operation.

Housekeeping

Before turning on machine remove all extra equipment such as keys, wrenches, scrap, stock, and cleaning rags from the machine. Keep the area around machine clean and free of scrap material and saw dust to minimize the danger of slipping. It never hurts to install a proper dust collection system. These days, you can set up an adequate dust collection system at quite a low cost so it wouldn’t be wise to not have one.

Don't Force Tool or Overreach

It will do the job better and safer at the rate for which it was designed. Keep proper footing and balance at all times. Don’t try to force feed the timber; it can pose a great risk for the machine and yourself.

Power On & Power Off

On machines equipped with a manual starter make sure the starter is in the "OFF" position before connecting power to machine. Don’t forget to ensure that the machine is either unplugged or electrically disconnected and locked out when performing maintenance or service work.

ToolOrbit offers you to buy Jet Band Saw, Powermatic Saw and Wilton Saw Blades on lowest online prices.


Street Talk

No comments present
You May Also Like
Pros And Cons Of Hitachi Ds18dsal 18v Li - ion Cordless Drill/driver
When it comes to powerful drills and drivers, I have utilized DeWalt and Craftsman devices for whatever length of time that I can recollect. As of late my old standby drill kicked the bucket and I had a home task to handle; I had been out of the business sector…
By:  in  Home Improvement  >  Tools and Equipment   Jun 02, 2016  
0
  Likes: 0

Woodworking Without Power Tools, A Life - long Love Affair With Hand Woodworking Tools
Woodworking is as much a relationship with your materials and your woodworking hand and power tools as it is a livelihood. When starting out as a woodworker / carpenter in 1974, I had been in a furniture making program in an art school on the East Coast. There I had…
By: patti tronolone in  Home Improvement  >  Tools and Equipment   May 28, 2016  
0
  Likes: 0

Why Hitachi Nt50ae2 Brad Nailer Offers Great Value
I’ve stayed with Hitachi nail guns for as far as I can remember as they feature best in class build quality, performance and durability. Besides you can buy Hitachi nail gun parts if you want so reparability is also a plus. This brad nail gun is Hitachi's one of the…
By:  in  Home Improvement  >  Tools and Equipment   May 28, 2016  
0
  Likes: 0

Gimmicks In A Lathe You Should Not Care About
When you are looking to buy a lathe, there are many options out there for you. Going with JET lathe is always a good option as the manufacturer provides a satisfying warranty and if anything goes wrong, JET parts, specifically JET lathe parts are available from many outlets. Quality and…
By:  in  Home Improvement  >  Tools and Equipment   May 16, 2016  
0
  Likes: 0

Services Offered By Experts In Removals Brighton Has
The more you think about the relocation, the more tempted you are to postpone it for a long time: it's so complicated to handle all the packing and the moving! Well, in order to enjoy a smooth and hassle-free relocation, the answer is to hire a company expert in removals…
By: Sheraton Veranda in  Home Improvement  >  Tools and Equipment   May 05, 2016  
0
  Likes: 0

Difference Between Original & Aftermarket Spare Parts
Craftsmen can run into many issues and one of them is broken or damaged tool. It’s not an ideal situation to be in but luckily there are alternatives available other than buying a new replacement. You can either get a refurbished or reconditioned tool or you can choose to repair…
By:  in  Home Improvement  >  Tools and Equipment   Apr 19, 2016  
0
  Likes: 0

What Are Different Type Of Hinges And Their Applications?
They are small and inconspicuous, but they really hold a room together. No, they are not pillow or candles, they're hinges that are found in every room of your house. From the refrigerator to the cabinet door, you can find them all around your home. Sure, you don't give much…
By: Van Marks in  Home Improvement  >  Tools and Equipment   Apr 13, 2016  
0
  Likes: 0

How To Change Chucks On Jet Lathes
Thousands of woodworkers and carpenters rely on JET lathes every day for a range of applications and jobs. JET offers sturdiness, durability, performance and value in a single package. It’s hard to find a better deal than JET’s offerings. Furthermore, if the tool or piece of equipment suffers any damage…
By:  in  Home Improvement  >  Tools and Equipment   Apr 08, 2016  
0
  Likes: 0

6 Ways To Maintain Your Jet Power Tools
Craftsmen put considerable money in power tools. A hefty portion of us truly cherish them, yet even with the best expectations, each of us could utilize a few tips about how to maintain their power tools especially if they’re made by JET. Good thing about JET tools is that if…
By:  in  Home Improvement  >  Tools and Equipment   Apr 07, 2016  
0
  Likes: 0

Porter Cable C2002 Oil Free UMC Pancake Compressor
When I’m in need of a pancake compressor to do some light to heavy duty tasks, I always consider what Porter Cable has to offer as they have a long history of manufacturing some of the best compressors. The build quality is awesome, performance is reliable and in adverse circumstances…
By:  in  Home Improvement  >  Tools and Equipment   Apr 04, 2016  
0
  Likes: 0

Always Buy The Commercial Grade Locks For Commercial Buildings
Small business owners may want to save their money by buying and installing the residential or standard duty door locks available at their hardware store. However, what seems like money saved can end up being money wasted. Residential/standard hardware doors are not designed to withstand the usage of commercial applications.…
By: Van Marks in  Home Improvement  >  Tools and Equipment   Mar 31, 2016  
0
  Likes: 0

Porter Cable Cmb15 – An Extremely Portable Air Compressor
I know some expansion assignments are verging on difficult to pull off without the assistance of an air compressor. Bike tires, inflatable balls, flatboats, and your kids' inflatable pools must be pumped loaded with air. Your car is a great example for instance, now and again, you have to look…
By:  in  Home Improvement  >  Tools and Equipment   Mar 29, 2016  
0
  Likes: 0

Common Sound Proofing London Mistakes to Avoid
The benefits of sound proofing London your home are many, but you have to do it right. Most people commit a number of mistakes, which, if avoided, can ensure a noise-free room or home. Some common noise insulation London slip-ups include using the wrong techniques, ignoring sound gaps, using poor…
By: aby in  Home Improvement  >  Tools and Equipment   Mar 29, 2016  
0
  Likes: 0

Maintenance And Care Of Milwaukee Drills & Impact Drivers
Purchasing a good tool is only a half job done. The other half is to use the power tool appropriately in a way it is intended to be used and take care of it during its lifetime. Now, Milwaukee drills and impact drivers are pretty darn good tools and there…
By:  in  Home Improvement  >  Tools and Equipment   Mar 25, 2016  
0
  Likes: 0

When I Found That Searching on the Net Was Safe And Economical
I have continually been the kind of person who goes to the market to shop for my pet provides. it had been simply easier to choose up the items my family wants for our cats whereas we tend to were shopping for our own groceries - approximately i believed. I…
By: Adolff Wilsonn in  Home Improvement  >  Tools and Equipment   Mar 25, 2016  
0
  Likes: 0

Article Views: 954    Report this Article